Isostatic Press
Warm Isostatic Press (WIP)
Product summary Information
This equipment performs a pressing/high-pressure treatment process at the target temperature for products that require changes in temperauter properties. It integrates the previously separate Cold/Hot Lamination processes to increase production efficiency.
Key Features
Produce efficiency | User Convenience | High Safety Standards
Application
Used in lamination processes such as electrical/electronic materials(MLCC/LTCC), Multi Other Chips, etc.
Custom orders are also possible for conditions other than the standard specifications, so please consult with your sales representative.
High Pressure Vessel
Safe Pressure Vessel design
– Designed according to U.S. ASME standards
– Domestic industrial safety and gas safety inspections carried out
Optimization of pressure vessel design
Clean room specialized configuration
Select Various Product
Classification by purpose of use
It is classified according to their specification purpose and temperature specifications
and is used in various fields such as ceramics, metal forming, electronic components, and food using ultra-high pressure.
Selection Guide
How to choose Pressure vessel
| C-Clamp Type | Thread Closing Type | Pin Closing Type | Yoke Frame Type | |
|---|---|---|---|---|
| Applicable model | CIP / WIP | CIP / WIP | CIP / WIP / HPP | CIP / HPP |
| Schematic |
|
|
|
|
| Summary | This equipment is suitable for producing large quantities of products at low pressure. | This equipment is suitable for producing large quantities of products at high pressure. | This equipment is suitable for producing large quantities of products at high pressure. | This equipment is suitable for producing large quantities of products at ultra-high pressure. |
| Recommended Pressure | Below 1,000 bar | ~ 1,500 bar | ~ 4,000 bar | ~ 6,000 bar |
| Recommended Temperature | Room Temperature ~ 80℃ | Room Temperature ~ 130℃ | Room Temperature ~ 120℃ | ~ Room Temperature |
| Recommended Volume | Custom | 100L / Custom | 100L / Custom | 200L / Custom |
| Details |
- Movable Cover (Easy IN/OUT product) - Structure that can be equipped with a heat jacket when temperature is required - Can be used as an external pressure test device - Easy to clean and maintain - Automated process possible - Can be equipped with a metering pump for low-volume, low-pressure applications - Excellent energy efficiency - O-ring Seal Type |
- Equipped with a basket for easy product loading/unloading - O-ring Seal, U-packing Wire Winding Technology can be applied - Automated process possible - Excellent energy efficiency - Increased heating rate - Reduced temperature deviation - Improved durability , extended service life - Improve Productivity |
- Equipped with a basket for easy product loading/unloading - O-ring Seal, U-packing Wire Winding Technology can be applied - Automated process possible - Excellent energy efficiency |
- Equipped with a basket for easy product loading/unloading - Stable operation at ultra-high pressure - Automated process possible - Excellent energy efficiency - O-ring Seal, U-packing Wire Winding |
Main control panel
Easy to operate
and High performance control panel
Experimental
| Series | Volume (L) | Pressure (bar) | Pump | Closing Type | Temp. (℃) | Internal Diameter (Ф) |
|---|---|---|---|---|---|---|
| ISA - WIP 500 | 0.5 | ~ 6,000 | Air Drivedn | C-Clamp / Pin | 90 (Discussion is needed over 90℃) |
50 ~ 100 |
| ISA - WIP 1000 | 1 | 70 ~ 100 | ||||
| ISA - WIP 2000 | 2 | 80 ~ 120 | ||||
| ISA - WIP 3000 | 3 | ~ 5,000 | 100 ~ 200 |
Mass Product
| Series | Volume (L) | Pressure (bar) | Pump | Closing Type | Temp. (℃) |
|---|---|---|---|---|---|
| WIP - P | ~ 100 (Select depends on Product size) |
~ 4,000 | Air Pump / Hydraulic Pump | Pin / Cover | 90 (Discussion is needed over 90℃) |
